FEA Of A Horizontal Pressure Vessel | Case Study
In this study, the evaluation of nozzle- shell junction of a horizontal pressure vessel was performed using finite element analysis. High stress at the nozzle to head or shell junction area are common. Due to discontinuity of the geometry, the defect can occur and the junction region can become the weakest point, which will be the source of failure of the whole structure. Find out engineering solution in this case study.
Saipem Meg And Solvent Mixing | Case Study
Fluid Codes supported SAIPEM with the model injection of thinning solvent into existing gas piping system. Read this case study to find our engineering solution.
FEA Of Column For GASCO | Case Study
Gasco required to study an existing column built in 1978, which was heavily corroded and some places replaced with new sheet metal. The goal was to verify the integrity of the renovated column with the various working conditions and loads, internal pressure, packing load, nozzle load, platform load, pipe support, insulation, operating liquid and self-weight. Find our engineering solution that was done by Fluid Codes team.
Ansys Multiphysics Solutions For Microwave Dryer With HFSS – Fluent Coupling l Case Study
Revolutionize metal casting and optimize sand core drying with microwave technology using Ansys HFSS and Fluent Multiphysics simulation
CFD Analysis Of Intake Manifold | Case Study
A CFD analysis of a manifold was performed in order to understand if there was any significant stagnant zone and low velocity regions, which are difficult to acquire from experimental techniques. Read this case study to learn more.
Roof Configuration Of A Storage Tank | Case Study
Storage Tank can fail for several reasons of which corrosion can be the major cause. The customer wanted to validate the roof configuration for its structural integrity and also to validate the tank under a seismic load. Read engineering solutions from Fluid Codes technical team.
Water Pump Station | Case Study
Computational Fluid Dynamics (CFD) modelling was carried out for a Water Pumping Station and their compartments in order to determine flow paths/flow distribution such that an economic design may be conceived and constructed. Read engineering solution.
Heat Exchanger | Case Study
For the present investigation, the CFD technology was used to design a full-scale 3D model of the water entrance area of a heat Exchanger. Read engineering solution for this case study by Fluid Codes.
CFD Analysis For Alpha PLATFORMS | Case Study
Computational Fluid Dynamics study for the Living Quarters Platform helipad of RasGas Alpha installation in Qatari waters was carried out in order to assess the impact of air turbulence on helicopter operations. Read engineering solution for this case study by Fluid Codes.
Assessing Reactor Tank Integrity | Case Study
Fluid Codes’ customer wanted to investigate the Agitator Blades Failure in one of their reactors for which CFD and FEA analysis were carried out. 3D CAD models of the tank and the agitator rotor blades were generated as per the drawing provided by the client. Read engineering solution for this case study by Fluid Codes.
