Revolutionize metal casting and optimize sand core drying with microwave technology using Ansys HFSS and Fluent Multiphysics simulation

Gasco required to study an existing column built in 1978, which was heavily corroded and some places replaced with new sheet metal. The goal was to verify the integrity of the renovated column with the various working conditions and loads, internal pressure, packing load, nozzle load, platform load, pipe support, insulation, operating liquid and self-weight. Find our engineering solution that was done by Fluid Codes team.

Fluid Codes supported SAIPEM with the model injection of thinning solvent into existing gas piping system. Read this case study to find our engineering solution.

In this study, the evaluation of nozzle- shell junction of a horizontal pressure vessel was performed using finite element analysis. High stress at the nozzle to head or shell junction area are common. Due to discontinuity of the geometry, the defect can occur and the junction region can become the weakest point, which will be the source of failure of the whole structure. Find out engineering solution in this case study.

CFD is now a commonly used tool for assessing atmospheric dispersion of pollutants from stacks. Fluid Codes was engaged to study the dispersion of CO released from a car park exhaust system onto a newly proposed building to be positioned directly adjacent. The client was concerned about that the new building, which was in a planning stage, could potentially be immersed in high concentrations of CO.

Dar Al-Handasah, an internationally recognized engineering firm, was involved in the design and construction of Terminal 3 concourse at Dubai International Airport. As part of the project, ANSYS CFD was used to design the ventilation system and validate the safety and thermal comfort within the concourse.

Fluid Codes was engaged in to carry out a CFD study for smoke extraction in the Meraas Outlet Village Mall, which was in the final construction stage. The simulation was carried out to validate the performance of smoke extraction system within the mall, for two different fire scenarios at different instances.

Part of the piping system was developed by Petrofac, feeding two separators. The objective of this case study was to find out more about the fluid distribution conditions through the piping system and to predict the multiphase fluid flow rates passing to each separator under different operating conditions. Read this case study to find out engineering solution done by Fluid Codes team.

A CFD analysis was carried out for a reactor tank with agitator by Fluid Codes team . FEA analysis was also performed for the shaft and agitator in order to predict the failure of agitator blades. Fluid-structure interaction was the key point for this analysis, by mapping the pressure loads from CFD as loads (inputs) for the FEA Analysis.

In this case study, Fluid Codes team supported ENOC with the project “Lifting of Top Portion OF Sphere for Erections”. Discover challenges and engineering solution.